Welding never was so comfortable.

  • Comfortable Welding Cap
  • Shade Level range 9 to 12 in Active Mode
  • Shade Level 3 in Light State
  • Three Variants for different fields of application

if product design award gold 2014red dot award 2014

The weldcap RC 3/9-12

The weldcap® - an automatic welding cap, that combines the comforts of a leisure hat with the advantages of a full welding helmet. Predestined for users whose area of ​​responsibility includes not only welding but also other metalworking tasks. You are performing changing working steps where the welding protection must be quickly put on and taken off? Then you will be enthusiastic about our weldcap® line .

  • Shade level 3 / 9 to 12
  • 2.7 times the field of view of a standard industry welding helmet
  • super light and super comfortable
  • simply cool

The weldcap bump RCB 3/9-12

On demand of variuous professional welders: the weldcap® new with integriated bump cap according to EN812/A1. 

The revolutionary optrel weldcap® RC 3/9-12, that combines the comfort of a baseball cap with the advantages of an automated welding helmet (ADF), is now available in a new extended version: the optrel weldcap® bump RCB 3/9-12. 

Where at normal ADFs the head is only protected in parts, the weldcap® bump now offers a complete protection of the upper head part against painful strikes. Even more, the bump cap gives the weldcap an additional stability and a safety feeling like a full face helmet to the welder, without getting noticeably heavier. 

The easy to remove textile part is made from washable and non-flammable material. You can buy it separately, which means you can turn any existing weldcap® into a weldcap® bump and vice-versa.

Dr. Ramon Hofer Kraner – Head of R&D: „With the weldcap® bump we extended the scope of application of the weldcap® measurably. With the bump cap it's also fitting welders’ needs about higher safety standards“. 

The weldcap hard RCH 3/9-12

Compatible with standard hard hats. Mount the weldcap® hard with a minimum of efforts on your industrial helmet. The cap ’s design accommodates the use of ear muffs.

weldcap series

Radical. Casual.

On the occasion of the leading international Welding & Cutting trade fair in Essen, optrel is presenting the new optrel weldcap® to the world. Since the optrel weldcap® is neither a welding helmet nor a welding mask, optrel had to invent beside the product, also a new name for the product category.

Hence the name says it all, because the weldcap® stands for an auto-darkening welder’s cap that brings together the comfort of a casual cap and the advantages of a full welding helmet. The heart of this innovative product is the optical unit featuring a well-defined nose cut out. Thereby the visual unit is placed closer to the eyes compared to traditional welding helmets, which helps to increase the welder’s line of sight by 2.7 times!

Moreover, because of this, the weight shifts closer to the centre of gravity so that the weldcap® is excellently counterbalanced and the load on the back of the welder’s neck is significantly reduced. The optrel weldcap® weighs only 390 grams, so it is an absolutely lightweight. It relieves the welder of about 200 kg load capacity over a year, when compared to conventional welding helmets.

Darkening levels from 9 to 12 cover the majority of welding applications and with a protection level 3 in its general mode, the welder has a bright an well-lit view of the work-place This feature predestinates the optrel weldcap® for grinding jobs as well. The optrel weldcap® is also completely hygienic. The textile part is robust and easily detachable, and is made of easily-washable, flame retarded fabric.


Field of vision
+270%


Grind Mode


Lightweight

Fields of Application

  • Elektrode Welding (Stick Welding, SMAW)
  • MIG/MAG (GMAW)
  • GMAW High melting rate process
  • Flux Cored Wire Welding
  • TIG Welding (GTAW)
  • Plasma Arc Welding
  • Micro Plasma Arc Welding
  • Plasma Cutting

Certificates

Variants

1008.000
weldcap RC 3/9-12
1008.001
weldcap bump RC 3/9-12
1008.002
weldcap hard RC 3/9-12
Article Nr. Description Units Image
5000.040 Inside cover lens for weldCAP 5
5000.260 Front cover lens for weldCAP 5
5002.740 weldcap STARTER KIT:2xFront cover lens, 1xInside cover lens, 1xNose pad, 1 set of 2 batteries 1
5002.800 weldcap standard replacement textile 1
5002.810 weldcap bump replacement textile 1
5002.820 weldcap hard replacement textile 1
5012.800 Replacement cartridge weldcap RC 3/9-12 1
5002.700 Nosepad for weldcap 1
5002.720 Battery cover weldcap 1
8000.100 Helmet backpack - black/green 1
5002.900 parking buddy for weldcap and optrel welding helmets 1

Technical Data

Power supply
2 pcs LI-batteries 3V exchangeable (CR2032)
No need to switch on-off.
Viewing area
Viewing angle downwards: +37°
Viewing angle sidewards: +25°
Operating time batteries
1000 h
Sensors
Wide angle detection sensor
Light transmittance
Ultraviolet/infrared protection (maximum at any shade setting)
Visible range activated shade level DIN 9-12
Visible range not activated shade level DIN 3
Switching time
Light to dark at room temperature: 0.16 ms
Light to dark at 55°C / 131°F: 0.110 ms
Dark to light
0.3s
Classification EN 379
Optical class = 1
Scattered light = 1
Homogenity = 2
Angular dependence = 2
Classification EN 175
F (45m/s impact resistance)
Shape stability
Welding mask up to 180°C / 356°F
Front cover lens up to 135°C / 275°F
Grinding mode
Shade level DIN 3
Material
Rigid plastic face shield and flame retardent textile according to EN ISO 11611 (Class 1) and EN ISO 11612 (Class A/B1/C1/E3/F1)
Operation temperature
-10°C to +60°C / 14°F to 158°F
Storage temperature
-20°C to +80°C / -4°F to 176°F
Weight Helmet cpl.
approx. 400g
Warranty
2 years (except textile cap and batteries)

Further information

For further information pls refer to your optrel partner next to you or to our customer service.